Leica DFC9000 sCMOS camera

กล้องถ่ายภาพดิจิตอลขาวดำ แบบหล่อเย็นสำหรับงานถ่ายภาพฟลูออเรสเซนต์จากกล้องจุลทรรศน์ ยี่ห้อ ไลก้า รุ่น Leica DFC9000

สินค้าถูกแทนที่ด้วย Leica K8

Imagine you could image live cells as close as possible to their native state. Capture even faint fluorescent signal you currently miss. And discover what happens in the time between two subsequent images. Imagine you could get a better view of what really happens in cells!

The Leica DFC9000 sCMOS camera will turn your imagination into reality. This monochrome microscope camera with newest scientific CMOS (sCMOS) sensor technology for fluorescence imaging enables you to image your cells under near-native conditions.

Protect your cells with short exposure times
Capture highly dynamic processes with high-speed acquisition
Get more information in one image with large field of view

This Introduction to Camera Technology helps you judge camera performance.

Every photon counts

The Leica DFC9000 is built with a third-generation sCMOS sensor, currently state-of-the-art on the market. It performs with a quantum efficiency* of up to 82%.

Capture even the faintest, previously undetected fluorescence signals
See processes in the cell in the most realistic detail without unhealthy overexpression of the GFP-coupled protein

Reduce exposure times to a minimum

Protect your cells, reducing stress, and minimizing phototoxicity effects
Generate more reliable results with happy GFP-expressing cells

Protect your cells with high near-infrared sensitivity

Use red-emitting fluorescence tags to further reduce cell damage
Observe your cells with an outstanding spectral response of more than 60% quantum efficiency at 750 nm wavelength

*quantum efficiency depends on wavelength of light

Paramecium expressing GFP-Epiplasmin. Polyglycylated Tubulin immunolabeled with Cy5. Nucleus stained with Hoechst 33258 (blue). Acquisition with LAS X. Specimen courtesy of Dr. A. Aubusson-Fleury; CGM-CNRS, France

Life in the fast lane

What happens in the time between the acquisition of two subsequent images? Until now, this has been a study in guesswork.

With a capture-rate of 50 frames per second (fps) via its USB 3.0 interface, the Leica DFC9000 GT is in the fast lane – and we’re talking full frames!

Acquire real-time, high-speed time-lapse recordings with accurate time stamps
Prove the intermediate steps of the complete temporal sequence of processes you are analyzing

If you want even more speed, you can freely define a region of interest to reduce readout area.

And if faster than fast is still not fast enough, use the Leica DFC9000 GTC variant:

With the Leica DFC9000 GTC, the camera can capture images at a rate of 90 fps full-frame via the Camera Link interface. If you want to reduce data volume and shorten exposure times further, choose from five binning modes to balance out resolution and data volume.

Euglenida spec., 160 fps, acquired region of interest: 512×512 pixel

Catcher of the light

The Leica DFC9000 is designed for high-end fluorescence imaging of live cells such as time-lapse experiments.

Less noise means a better image. In technical terms, a high signal-to-noise ratio (SNR) provides you with a crisp fluorescence signal against a dark background.

The Leica DFC9000 is a highly sensitive sCMOS camera:

High quantum efficiency over the entire light spectrum with a maximum of 82%
Low read noise of 0.9 e- at 216 MHz pixel clocking rate
Cooled sensor; cooling to 0° Celsius by air circulation

These features make the Leica DFC9000 also ideally suited for our lightsheet system Leica TCS SP8 DLS.

Vero cells marked with DAPI, Anti-Tubulin, and Anti-Pmp-70 (peroxisomes)

Matchmaking by Leica

See more with imaging systems from one source: Leica Microsystems provides you with imaging systems specifically designed to take full advantage of sCMOS sensors to ensure that you do not miss any data.

The uniquely perfect match

19 mm diagonal of the Leica DFC9000’s sCMOS sensor
19 mm camera port with full optical correction in many Leica research microscopes

Acquire fewer images

If you want to acquire tile scans or mosaics, fewer individual images are required
Save time and protect your samples

Standard imaging port matches 19 mm diagonal of DFC9000 sensor. See 41% more at a glance and be 30% faster during tile scans!

Conduct your imaging orchestra

The Leica DFC9000 is part of a carefully tuned microscope platform capable of being triggered at high speed. Protect cells from unnecessary light, take advantage of fast filter changes for your multicolour imaging.

Leica Application Suite X software

Triggering is based on Leica Microsystems’ flexible electronic box system and Leica Application Suite X (LAS X) software.

Flexible: Trigger up to 2 cameras with the electronic box
Simultaneous: Combine the camera with DualView or Gemini for simultaneous acquisition of 2 wavelengths

Leica DMi8 Inverted Microscope with Leica DFC9000 Microscope Camera

Workflow facilitator

A broad range of tools from the LAS X software available with the Leica DFC9000 provides you with the versatility to document your live cells and fixed specimens with ease.

High-speed, real-time time-lapse
Extended depth of focus
Deconvolution
3D rendering and analysis

Are you not yet familiar with advanced camera features? Some of these features can be hidden in the user interface through a smart user access approach. Different levels of access can be granted to inexperienced users or experts, to make your workflow more efficient.

LAS X can be used with all Leica fluorescence cameras.